Avanti T-18 Manual de Instruções

Spesifications Avanti S Type : T.A.V.S Airex Carbon Composite Length : 112” (2860mm) Span : 97.6” (2480mm) Weight : 38—44Lbs (

Assembly & Operation Manual P-10 3 x Air Tanks 1

Assembly & Operation Manual P-11 Oleo oil and pressure kit Phot

Assembly & Operation Manual CONTROL LINKAGES Flaps : 80 mm (2) Aileron : 100 mm (2) Elevator : 100 mm (2) Rudder :

 Fit L-shape servo brackets to JR DS8911  Aileron servo must be mounted with horns facing outwards and must be furthest from control surf

 Secure servo horn to flap servo and set travel with TX.  Mark location of servo horn on wing skin. Cut slot.  Fit servo to ply mount with horn f

Assembly & Operation Manual STABILIZERS NOTE: Make sure to have some sort of protective foam on the work bench. This will protect the paint surfa

Assembly & Operation Manual  Make sure no slop and binding in system  Run servo wires together in harness. NOTE : Make sure no wires can touc

FUSELAGE REAR + TAILPIPE Make sure you have a good stand for fuselage. You will need to assemble the rest of the Avanti on this stand. Fuselage have

Assembly & Operation Manual FUSELAGE FRONT  Fit the steering servo with m3 bolts.  Make pushrod and secure.  Check operation of steering.  Fas

FUEL CELL DIAGRAM P-19 Assembly & Operation Manual Photo 40

Index: INTRODUCTION...

AIR SYSTEM There are 2 options available for the air system: Mechanical or Electronic. For mechanical you will need 2 x 2 way and 1 x 1way valve wit

AIR DIAGRAM P-21 Assembly & Operation Manual Photo 43 Diagram for retracts  You can al

TURBINE INSTALLATION  Please follow the instructions supplied with your turbine.  Secure turbine to turbine rail via rear of fuselage

COCKPIT AND CANOPY (after painting) P-23 Assembly & Operation Manual  Trace the shape of canopy and cut t

EQUIPMENT INSTALLATION INTO Avanti S P-24 Assembly & Operation Manual  Equipment installation is a per

BEFORE YOU FLY P-25 Assembly & Operation Manual It is assumed that the builder of this kit has acquired the basic

P-26 Assembly & Operation Manual Take-Off Do some taxi tests before your flight! Make sure you are familiar wi

Assembly & Operation Manual INTRODUCTION Thank you for purchasing Sebart Avanti S. We have put a lot of effort and time into this model. We at S

Assembly & Operation Manual ARF Paint The color finish on your Avanti S arf pro model was applied out of the mould. We have used only the highest

Assembly & Operation Manual HANDLING & TRANSPORTING Composite models are very light but strong. These characteristics do have a down side!

Tools and Adhesives Tools etc: This is a fairly quick and easy plane to build, for a jet model, not requiring difficult techniques or special equip-m

Assembly & Operation Manual HEALTH Use a mask (available at auto paint stores) to protect from inhaling the glass or carbon fiber dust. Use this

Radio equipment Failure to use the recommended servos, output arms, extensions, and hardware may result in a loss of con-trol! Throughout this man

Kit Contents Avanti S ARF PRO Contents: 1. Right wing including L/G + Doors installed. Include flap + aileron 2. Left wing including L/G + Doors i